2026 Price Guide
How much does a fence cost in Lancaster?
Per linear foot numbers you can plan around, not a teaser rate that climbs once somebody sees your lot. Here is what fencing actually costs in Lancaster, by material, and exactly what moves the price on this ground.
Cost by fence type
| Fence type | Installed / linear ft | Typical 100 ft | Typical 150 ft |
|---|---|---|---|
| Chain link (commercial and temporary only) | $18 to $40 | $1,800 to $4,000 | $2,700 to $6,000 |
| Ranch rail | $18 to $38 | $1,800 to $3,800 | $2,700 to $5,700 |
| Wood privacy | $30 to $60 | $3,000 to $6,000 | $4,500 to $9,000 |
| Vinyl / PVC | $40 to $70 | $4,000 to $7,000 | $6,000 to $10,500 |
| Wrought iron | $50 to $120 | $5,000 to $12,000 | $7,500 to $18,000 |
Inside each range: posts set in concrete, whatever the infill is (panels, fabric, or rails), gates and hardware that fall within the run, and the labor to install it. The quote we write gets cut to your own property line, the material you pick, and whatever the ground turns out to be.
Where you land in a range comes down to your lot: how much wind the run has to take, and whether the auger hits caliche. We would rather measure it than guess.
Request a quoteLong rural runs, priced by the perimeter
Half the fencing in this city is not a backyard, it is a boundary. On acre-plus and desert-edge parcels the question is not what 150 feet costs, it is what 500 or 1,000 feet costs, and at that scale the material choice is the entire budget. This is why chain link and ranch rail dominate the big lots here.
| Perimeter | Chain link | Three rail ranch | Wood privacy |
|---|---|---|---|
| 300 linear ft | $5,400 to $12,000 | $6,600 to $9,600 | $9,000 to $18,000 |
| 500 linear ft | $9,000 to $20,000 | $11,000 to $16,000 | $15,000 to $30,000 |
| 1,000 linear ft | $18,000 to $40,000 | $22,000 to $32,000 | Rarely practical |
The good news on scale is access. Flat, open ground and long straight lines mean equipment gets everywhere easily and a crew covers a lot of footage in a day, so the per foot rate on a long run often comes in below a fiddly short one.
Long perimeters swing by thousands of dollars on footage alone, so a walked line beats a rounded number every time. Tell us the parcel and we will price the real perimeter.
Request a quoteGates and add-ons
| Item | Typical installed |
|---|---|
| Walk gate | $350 to $1,200 each |
| Driveway gate (manual) | $2,000 to $8,000 and up |
| Automatic gate operator | add $1,500 to $5,000 |
| No-climb wire behind rail | add $6 to $12 / linear ft |
| Welded pipe corral | $30 to $55 / linear ft |
| Old fence demo and haul-off | $3 to $10 / linear ft |
Driveway gates carry the widest spread of anything on this page, because a solid gate leaf on a long rural drive has to be built for wind loading. We will price the leaf and the operator together.
Request a quoteWhat drives the price up or down in Lancaster
- The wind package. Building for 40 to 50 mph gusts costs more, plainly. About 3 feet of post embedment instead of 2, wider concrete footings, posts at 6 feet on center rather than 8, and heavier gauge posts. On a solid privacy run that usually adds a few dollars per linear foot, and it is the single best money you will spend.
- Solid versus open. A solid privacy panel is a sail and needs the full package. Chain link and rail let the wind through and do not, which is a large part of why they cost less per foot to begin with.
- Caliche hardpan. Loose sand over a cemented layer that stops an auger means heavier equipment or breaking through before a post can be anchored below it. Some parcels here are sandy loam with no caliche and dig fast. We test on the estimate rather than guessing.
- Run length. Long straight desert runs are efficient per foot. Short, broken runs with lots of corners, returns, and obstacles cost more per foot to build.
- Material grade in this sun. Cheap thin vinyl and wet-painted steel are the false economies here, because intense UV finds them. Heavier vinyl and baked powder coat cost more up front and outlast them by years.
- Removing an old fence. Tear-out and haul-off costs money, so it gets its own line on the quote instead of being buried inside a per foot rate.
- Gates and access control. On most rural Lancaster properties, nothing adds more to a total than a driveway gate running on an automatic operator.
A real Lancaster example
Take a common job: an in-town lot near Avenue K wanting 150 feet of 6 ft cedar privacy along the back and one side, plus a walk gate, replacing a leaning fence the wind finished off. Figure $4,500 to $9,000 for the fence itself, $3 to $10 a foot for demo and haul-off, so roughly $450 to $1,500 there, and $350 to $1,200 for the gate. Total lands around $5,300 to $11,700 depending on wood grade, steel posts, and the digging.
Now the other end of town: a 3 acre parcel wanting a 1,400 foot three rail perimeter with no-climb wire on 400 feet of it and a 16 ft trailer gate. Rail at $22 to $32 puts the perimeter around $31,000 to $45,000, wire adds roughly $2,400 to $4,800, and the gate is a few thousand more. Different job, different math, same principle: the per foot number times the real perimeter, plus the pieces that are genuinely extra.
Ranch rail versus rail plus wire on a big lot
On a home here the mesh option is off the table, so the real choice is rail alone or rail with no-climb woven wire behind it. Wire actually contains things: dogs, kids, and anything that would otherwise wander onto Avenue somewhere. It gives you a physical barrier at the lowest cost per foot, and black vinyl-coated mesh disappears against desert landscaping better than most people expect. Ranch rail looks like the valley and suits horses, since an animal can see a rail and respect it, but a dog walks straight under three rails unless you add no-climb wire, which is the honest comparison to make. On a horse property we often do both: plain rail along the road frontage where it is seen, and rail with woven wire behind it where something needs to actually stay put.
Want the number for your own lot?
Somebody comes out to the Lancaster property line, tapes the run, tests what the digging is like, and reads the wind exposure, then hands over a fixed written quote. Costs nothing, and there is no card to put down.
Request a quoteCost questions
What is the per linear foot cost in Lancaster?
Chain link installs at $18 to $40 per linear foot, ranch rail $18 to $38, wood $30 to $60, vinyl $40 to $70, and wrought iron $50 to $120. Long open runs in rail sit at the low end, and so does chain link on the commercial lots where the code still allows it. Solid privacy fence carrying a full wind package, and ornamental iron, sit at the high end.
What does 150 feet of wood privacy come to?
Figure $4,500 to $9,000 installed for 150 linear feet of 6 ft wood privacy fence, and that covers posts, panels, hardware, and labor. Setting posts about 3 feet deep in wider footings with closer spacing for wind, tearing out an old fence, or hitting caliche hardpan moves it toward the upper end.
Why does wind engineering add to a Lancaster fence price?
Because a fence that stands up to 40 to 50 mph gusts uses more of everything. About 3 feet of post embedment instead of 2, wider concrete footings, posts at 6 feet on center instead of 8, and heavier gauge posts all mean more material, more concrete, and more digging. On a solid privacy run that package typically adds a few dollars per linear foot, and it is the difference between a fence that lasts and one that leans.
Does caliche hardpan make fencing more expensive in Lancaster?
It can. Much of the valley is loose sand over a cemented caliche layer that behaves like rock and can stop an auger, so those holes take a heavier auger or breaking through before a post can be anchored below it. On a long rural run that is real added labor. Parcels on sandy loam with no caliche dig quickly and cost less, which is why we test the ground on the estimate.
Keep reading
The overview of Lancaster fence services covers the same ground across every material.